Exterior walls and structural members that are of approved noncombustible or limited combustible materials and interior structural members
... [Show More] constructed
wholly or partly of wood are considered - correct answer Type III
To protect steel structural components of a building, which of the following may be applied to protect the steel from heat? - correct answer Layers of gypsum board
Curtain walls: - correct answer are nonbearing exterior walls
Which of the following is a component in a required means of egress from normally occupied spaces? - correct answer Protected stairs
unprotected noncombustible construction is: - correct answer generally limited to a maximum of two stories
The ___________ plan shows the relative locations of walls, doors, windows and other features. - correct answer floor
The common classifications of sprinkler systems include which of the following? - correct answer wet-pipe system
Which of the following is a type of sprinkler system that maintains air under pressure in the sprinkler piping? - correct answer Dry pipe
The color of a sprinkler head rated 500 degrees to 575 degrees, or "extra high" is" - correct answer Orange
The color of a sprinkler head rated 250 degrees to 300 degrees or "high" is: - correct answer Blue
Direct pumping water systems are those in which water: - correct answer is pumped directly into the distribution system
The required residual pressure when computing available water supply in a specific are is _________ psi. - correct answer twenty
Which detector is most apt to give a false fire indiction alarm when monitoring an area where arc welding is taking place? - correct answer Ultraviolet
A(n) _____________ detector generally responds more quickly to smoldering fires. - correct answer photoelectric
Smoke and fire dampers are typically located at points where: - correct answer HVAC ducts penetrate smoke and fire barrier walls
Extinguishers suitable for Class A fires should be identified by a __________ containing the letter "A." If colored, it should be ____________. - correct answer tringle, green
The common hazard associated with central heating appliances, unit heaters and room heaters is: - correct answer proximity of installation to combustibles
To prevent accidental ignition of combustible material in a welding shop, which of the following actions should be followed? - correct answer Shop rags should be stored in metal containers
When transferring flammable or combustible liquids, what precaution must be taken to prevent a spark due to static electricity? - correct answer Provide a bonding wire between the containers
fire flow tests are made to determine the rate of fire flow available for fire suppression at various locations within the: - correct answer distribution system
the interlocking network of water mains that compose a water distribution system is a: - correct answer grid or gridiron
The system that is designed to provide constant pressure or flow when pipes on the grid must be repaired is called a: - correct answer grid or loop
movement of water from a natural source, such as a lake into a reservoir, is facilitated by: - correct answer pumping stations
Small structures that contain standpipe connections and hose lines reconnected to the discharge outlet are called: - correct answer hose houses
The hose connections to the FDC must be of the ___________ type and equipped with caps. - correct answer Female
A carbon dioxide extinguisher's principle means of discharge is: - correct answer Stored pressure
Most buildings utilize a system of passive smoke control. When the compartmentation concept is used, ____________ shut down, and fire and smoke _____________ close to prevent the further spread of fire and smoke. - correct answer Fans; dampers
Fire point is the minimum temperature required to: - correct answer ignite a liquid fuel in order to begin self-sustained combustion independent of the heating source
Which of the following is provided in a fire flow test - correct answer Water flow pressures
During a hydrant fire-flow test, water is discharged from a: - correct answer Flow hydrant
The difference in the height of the water source and the point of use creates: - correct answer Elevation pressure
A __________ consists of a network of pipes, storage tanks, control valves and hydrants. - correct answer distribution system
Fire flow tests are made to determine the rate of fire flow available for fire suppression at various locations with the: - correct answer distribution system
The principle pipe in a system of pipes for conveying water, especially one installed underground is a: - correct answer water main
There are 4 main views of working drawings. they include:
A. Divisional view
B. Utility view
C. Elevation View
D. Orientational view - correct answer C. Elevation view
Wood Frame or frame construction is commonly referred to as ___________ construction. - correct answer Type V
In a new building, the minimum door opening in a means of egress is __________ inches. - correct answer 36
The measurement for maximum travel distance starts from the __________ portion of the occupancy, curving around any corners or obstructions with a _________ foot clearance, and ending at the center of the exit doorway. - correct answer Most remote; one
One of the primary problems with external fire escape stairs is: - correct answer maintenance
a fire wall must be continuous from the foundation floor to a height: - correct answer above the roof as required by the local building code
Materials used for the exposed surfaces of the walls and ceilings of a building are usually known as: - correct answer interior finish
NFPA recommends that fire hydrants flowing 1500 gym or greater be color coded: - correct answer light blue
The terms bonding and grounding refer to the process of: - correct answer dissipating static charges
Combustible dusts present a unique hazard because of their ability to form ___________ mixtures within an enclosure - correct answer explosive
Heat that results from passing an electrical force through a conductor defines ____________ heating. - correct answer resistance [Show Less]