D. Jobs Contributing to highest incident rates
When implementing a job safety analysis program, what should be analyzed first?
A. Jobs generating the
... [Show More] most employee complaints
B. Jobs moving through each department
C. Jobs exposing the most workers
D. Jobs contributing to high incident rates
B. Fault tree anlaysis
Which is an accepted probabilistic risk assessment methodology used in global environmental regulatory processes for understanding and ranking environmental issues?
A. Environmental analysis
B. Fault tree analysis
C. Job safety analysis
D. Safety and health analysis
B. Diacetyl
In addition to the metal fumes, metal oxides, and the products of combustion from vaporized paints and coatings from the welded items, what hazardous gas is produced during electric arc welding?
A. Hydrogen peroxide
B. Diacetyl
C. Ozone
D. Diethylamine
A. Multiple subject matter experts familiar with the process being studied
What is essential when conducting a successful hazard and operability study?
A. Multiple subject matter experts familiar with the process being studied
B. A study leader familiar with the process being applied
C. A trained process safety engineer familiar with the relevant process safety regulations.
D. Multiple union and management representatives with safety procedures
D. A management system problem
What is characteristic of a root cause of an incident?
A. An intentional act made by an employee
B. An error made by an employee
C. An error made by a manager
D. A management system problem
D. Pocket dosimeter
Which device is best for measuring an employee's accumulated radiation dose?
A. Proportional counter
B. Scintillation counter
C. Geiger counter
D. Pocket dosimeter
A. Hexavalent Chromium
What metal fume hazard may be present when stainless steel is welded?
A. Hexavalent Chromium
B. Magnesium oxide
C. Zinc oxide
D. Antimony lead chromate
A. Velocity and static pressures
In a closed ventilation system, total pressure is the sum of the system's:
A. Velocity and static pressures
B. Pitot and velocity pressures
C. Static ambient pressures
D. Absolute and velocity pressures
B. Define the subsequent reporting responsibilities
When developing an incident data collection system, what is the most important first step?
A. Codify the data to conform to existing data sources
B. Define the subsequent reporting responsibilities
C. Establish incident reporting responsibilities
D. Prescribe appropriate investigation procedures
A. Chain of custody procedures
During an incident investigation, an investigator takes digital photographs. A few minutes later, the investigator prints the pictures and makes notes on the pictures describing the context, orientation of the photographer, lighting, date and time, and other information that may be helpful later in the investigation. What does this describe?
A. Chain of custody procedures
B. Spoiled evidence procedures
C. Rules of evidentiary preservation
D. Forensic maintenance procedures
A. Identify hazardous conditions, assess their risks, and establish effective risk control measures
What is the primary function of a loss control system?
A. Identify hazardous conditions, assess their risks, and establish effective risk control measures
B. Identify hazardous conditions, establish effective control measures, eliminate risk
C. Assess risk, establish effective risk control measures, eliminate risk
D. Establish effective risk control measures, assure compliance with applicable regulatory requirements, eliminate residual risk
A. Survey the facilities and operations to determine probable causes of the injuries
Because of high eye and foot injury rates, management at a union labor manufacturing plant must take action. Which action should a safety professional perform first?
A. Survey the facilities and operations to determine probable causes of the injuries
B. Initiate a personal protective equipment program that will include provision of both safety glasses with side shields and hard-toed shoes
C. Schedule a meeting with the head of the local union to review the injury problems.
D. Charter a facility-wide safety committee
B. 1 year with no lost time injuries or illnesses at the site
Which is the best example of a safety performance benchmark?
A. A thorough root cause analysis
B. 1 year with no lost time injuries or illnesses at the site
C. Earning ISO 14001 certification for the site
D. Management commitment and involvement
B. The product conforms to European health, safety and environmental protocols
What does the displayed CE marking on an electrical product for sale imply?
A. The product can be exported from the European Union to the United States or Canada
B. The product conforms to European health, safety and environmental protocols
C. The product is a certified electrical device
D. The product is listed on the European certified equipment list
B. Leading indicator
What kind of business metric is the safety [Show Less]