WATER RESTORATION FINAL EXAM Already Graded A+ 2023/2024
WATER RESTORATION FINAL EXAM
Already Graded A+ 2023/2024
Restorative drying is a process used
... [Show More] to recover from many forms of water intrusion
by:
assessment, documentation, controlled drying, selective replacement
Restorative drying is a process used to recover from many forms of water intrusion
by:
assessment, documentation, controlled drying, selective replacement
The systems of drying have been detailed in several key documents, including the
IICRC S500 Standard and Referance Guide for Professional Water Damage
Restoration. The S500 is?
"The Standard of Care for the water restoration industry.
The goal of the restoration process is to transform an abnormally wet, potentially
damaged structure into an environment that can be reoccupied, of equal or better
appearance and cleanliness that before the intrusion occurred, and to do so in the
most ___ __ and _ ____ means possible.
economical and efficient
The restorer begins this process by identifying all affected materials. Water must
be tracked from its initial source and diligently followed in every direction it
migrated to establish an accurate perimeter. Once the perimeter is identified, the
restorer then documents what types of materials have been __________.
affected
Affected materials are evaluated against three criteria to determine if they should
be restored or replaced. The three criteria are:
contamination, damage, cost
"After identifying the material and conSidering contamination, damage and cost,
the restorer decides which materials should be dried and which should be replaced.
In addition, the restorer will also decide which method of drying should be used,
including:"
"Drying progress is noted during daily monitoring visits. The restorer asks is it
drying?n while comparing two sets or data. The first and second sets of data,
recorded on a monitoring report, reflect the impact of the drying effort on the
affected material over a ______ period.
24 hour
" If materials are not drying, the restorer must re-evaluate the equipment, systems
and processes. If the current system is not working ________are required
changes
"Throughout the process, materials will return to normal moisture levels. The
restorer must constantly ask ""Is it done?"" during the monitoring process. This
means the restorer must know what done is. The materials must be compared
against a ______."
Drying Standard (drying goal)
"It is important that restoration processes and procedures are carefully evaluated to
ensure that they are appropriate. Because every job is different, the approach
should also be _______. "
different
The first line of defense against potential safety hazards is:
awareness
It is important to ensure a ________level of protection when considering PPE
proper
A dose evaluation of the potential________ is necessary in order to identify which
type of PPE would be appropriate [Show Less]