1) Check for vehicle test restrictions (AWD, GVWR, etc). If test restrictions apply, inform the customer.
2) Ensure the customer is provided an
... [Show More] estimate and the required test type is determined prior to drafting the invoice
3) Check hat all required equipment is up-to-date, maintained, and calibrated
4) Ensure vehicle is safe to test correct answer: What are the steps of the Pre-Inspection/Pre-Repair Check List?
1) If a stations lacks the equipment, tools, personnel, reference materials necessary to inspect a particular vehicle
2) If a station lacks the equipment, tools, personnel, reference materials necessary to repair a particular vehicle
3) If as a matter of policy, a test-and-repair does not repair certain types of vehicles or inspection failures correct answer: For what 3 reasons must a station reject a vehicle during the Pre-Inspection/Pre-Repair Check List?
Enter "NONE" correct answer: If there is no license plate, what should you enter?
Abort the test and start over using the correct info correct answer: What happens if an error is found after changes no longer can be made to the OIS or EIS?
True, enter just the last 7 digits correct answer: Don't enter the "E" preceding the plate number of government vehicles. True or False?
Enter "NONE" correct answer: If the odometer is missing or illegible, what should you enter into the EIS or OIS?
Enter "R" for vehicle certification type correct answer: What should you enter for a vehicle equipped with a Referee label?
1) SPCNS
2) grey market
3) vehicles with an engine change correct answer: Which vehicles should you not inspect unless it has a BAR Referee Label?
Enter the fuel in which the vehicle was operating when it arrived at the station correct answer: What fuel type should you enter for dual/bi-fuel vehicles?
Motorhomes and heavy duty vehicles with a drive axle weight over 5,000 lbs. correct answer: Which '76-'99 vehicles in Enhanced Areas are excluded from ASM inspections and instead have TSI inspections?
1) AWD or 4WD
2) Traction control that cannot be disabled
3) Too large to safely fit on dynamometer
4) Heavy duty with GVWR of 8,501 or greater
5) Heavy duty with unloaded drive axle weight over 5,000 lbs correct answer: Which vehicle designs are not compatible with the ASM test?
Vehicle is not currently transporting loads for delivery or is not carrying items of a temporary nature; excludes parts that have been welded, bolted, or permanently affixed correct answer: What does "unloaded" mean for purposes of a Smog Check?
Second gear; only select other gears to maintain the EIS specified RPM range correct answer: What gear should the ASM be conducted in?
Any alternative driving modes like "towing," "low traction," "performance," "sport" correct answer: Which gear's should you not use for automatic transmissions for the ASM inspection?
1) unsafe - gasoline leaks, large coolant leaks, faulty brakes, tire failure
2) unfit - low oil pressure, overheating, idle RPM outside of required limits
3) incompatible - traction control will not disengage correct answer: What are three examples of unsafe, unfit, or incompatible conditions?
e.g. pressure sensors, temperature sensors, oxygen sensors correct answer: VISUAL INSPECTION: Computers, Sensors, Switches
(only computer-controlled)
mechanical or electronic devices, mechanisms, or systems that control ignition timing correct answer: VISUAL INSPECTION: Ignition Spark Controls
(all computer-controlled vehicles)
Air flow meters, Injectors, Throttle bodies, Throttle positioners, Anti-"dieseling" solenoids, Early fuel evaporative, Choke controls, Deceleration controls, Dashpots, Carburetion, Fuel Injection correct answer: VISUAL INSPECTION: Fuel Metering System
Provides warm air to the air cleaner during cold start up. This helps to improve cold engine performance and reduce automotive emissions by providing better fuel vaporization. The TAC system is primarily used on carbureted and throttle body injected vehicles. correct answer: VISUAL INSPECTION: Thermostatic Air Cleaner (ACL/TAC)
Mechanically mixes fuel and air together correct answer: Carburetor
throttle body fuel injection systems correct answer: What replaced carburetors?
multi-port fuel injection - these systems have a fuel in [Show Less]