Absolute Temperature. - ANSWER-A temperature measured in Kelvins (K) or Rankines (R).
Accelerant. - ANSWER-A fuel or oxidizer, often an ignitible
... [Show More] liquid, intentionally used to initiate a fire or increase the rate of growth or spread of fire.
Accident. - ANSWER-An unplanned event that interrupts an activity and sometimes causes injury or damage or a chance occurrence arising from unknown causes; an unexpected happening due to carelessness, ignorance, and the like.
Ambient. - ANSWER-Someone's or something's surroundings, especially as they pertain to the local environment; for example, ambient air and ambient temperature.
Ampacity. - ANSWER-The maximum current, in amperes, that a conductor can carry continuously under the conditions of use without exceeding its temperature rating. [70, Article 100]
Ampere. - ANSWER-The unit of electric current that is equivalent to a flow of one coulomb per second; one coulomb is defined as 6.24 × 1018 electrons.
Arc. - ANSWER-A high-temperature luminous electric discharge across a gap or through a medium such as charred insulation.
Arc Mapping. - ANSWER-The systematic evaluation of the electrical circuit configuration, spatial relationship of the circuit components, and identification of electrical arc sites to assist in the identification of the area of origin and analysis of the fire's spread.
Arc Site. - ANSWER-The location on a conductor with localized damage that resulted from an electrical arc.
Arcing Through Char. - ANSWER-Arcing associated with a matrix of charred material (e.g., charred conductor insulation) that acts as a semiconductive medium.
Area of Origin. - ANSWER-A structure, part of a structure, or general geographic location within a fire scene, in which the "point of origin" of a fire or explosion is reasonably believed to be located. (See also 3.3.132, Point of Origin.)
Arrow Pattern. - ANSWER-A fire pattern displayed on the cross-section of a burned wooden structural member.
Arson. - ANSWER-The crime of maliciously and intentionally, or recklessly, starting a fire or causing an explosion.
Autoignition. - ANSWER-Initiation of combustion by heat but without a spark or flame.
Autoignition Temperature. - ANSWER-The lowest temperature at which a combustible material ignites in air without a spark or flame.
Backdraft. - ANSWER-A deflagration resulting from the sudden introduction of air into a confined space containing oxygen-deficient products of incomplete combustion.
Bead. - ANSWER-A rounded globule of re-solidified metal at the end of the remains of an electrical conductor that was caused by arcing and is characterized by a sharp line of demarcation between the melted and unmelted conductor surfaces.
Blast Pressure Front. - ANSWER-The expanding leading edge of an explosion reaction that separates a major difference in pressure between normal ambient pressure ahead of the front and potentially damaging high pressure at and behind the front.
BLEVE. - ANSWER-Boiling liquid expanding vapor explosion.
Bonding. - ANSWER-The permanent joining of metallic parts to form an electrically conductive path that ensures electrical continuity and the capacity to conduct safely any current likely to be imposed.
British Thermal Unit (Btu). - ANSWER-The quantity of heat required to raise the temperature of one pound of water 1°F at the pressure of 1 atmosphere and temperature of 60°F; a British thermal unit is equal to 1055 joules, 1.055 kilojoules, and 252.15 calories.
Burning Rate. - ANSWER-See 3.3.99, Heat Release Rate (HRR).
Calcination of Gypsum. - ANSWER-A fire effect realized in gypsum products, including wallboard, as a result of exposure to heat that drives off free and chemically bound water.
Calorie. - ANSWER-The amount of heat necessary to raise 1 gram of water 1°C at the pressure of 1 atmosphere and temperature of 15°C; a calorie is 4.184 joules, and there are 252.15 calories in a British thermal unit (Btu).
Cause. - ANSWER-The circumstances, conditions, or agencies that brought about or resulted in the fire or explosion incident, damage to property resulting from the fire or explosion incident, or bodily injury or loss of life resulting from the fire or explosion incident.
Ceiling Jet. - ANSWER-A relatively thin layer of flowing hot gases that develops under a horizontal surface (e.g., ceiling) as a result of plume impingement and the flowing gas being forced to move horizontally.
Ceiling Layer. - ANSWER-A buoyant layer of hot gases and smoke produced by a fire in a compartment.
Char. - ANSWER-Carbonaceous material that has been burned or pyrolyzed and has a blackened appearance.
Char Blisters. - ANSWER-Convex segments of carbonized material separated by cracks or crevasses that form on the surface of char, forming on materials such as wood as the result of pyrolysis or burning.
Clean Burn. - ANSWER-A distinct and visible fire effect generally apparent on noncombustible surfaces after combustible layer(s) (such as soot, paint, and paper) have been burned away. The effect may also appear where soot has failed to be deposited because of high surface temperatures.
Combustible. - ANSWER-Capable of undergoing combustion.
Combustible Gas Indicator. - ANSWER-An instrument that samples air and indicates whether there are ignitible vapors or gases present.
Combustible Liquid. - ANSWER-Any liquid that has a closed-cup flash point at or above 37.8°C (100°F). (See also 3.3.79, Flammable Liquid.)
Combustion. - ANSWER-A chemical process of oxidation that occurs at a rate fast enough to produce heat and usually light in the form of either a glow or flame.
Combustion Products. - ANSWER-The heat, gases, volatilized liquids and solids, particulate matter, and ash generated by combustion.
Competent Ignition Source. - ANSWER-An ignition source that has sufficient energy and is capable of transferring that energy to the fuel long enough to raise the fuel to its ignition temperature. (See 19.4.2.)
Conduction. - ANSWER-Heat transfer to another body or within a body by direct contact.
Convection. - ANSWER-Heat transfer by circulation within a medium such as a gas or a liquid.
Creep. - ANSWER-The tendency of a material to move or deform permanently to relieve stresses.
Current. - ANSWER-A flow of electric charge.
Deductive Reasoning. - ANSWER-The process by which conclusions are drawn by logical inference from given premises.
Deflagration. - ANSWER-Propagation of a combustion zone at a velocity that is less than the speed of sound in the unreacted medium. [68, 2013]
Density. - ANSWER-The mass of a substance per unit volume, usually specified at standard temperature and pressure. The density of water is approximately one gram per cubic centimeter. The density of air is approximately 1.275 grams per cubic meter.
Detection. - ANSWER-(1) Sensing the existence of a fire, especially by a detector from one or more products of the fire, such as smoke, heat, infrared radiation, and the like. (2) The act or process of discovering and locating a fire.
Detonation. - ANSWER-Propagation of a combustion zone at a velocity greater than the speed of sound in the unreacted medium. [68, 2013]
Diffuse Fuel. - ANSWER-A gas, vapor, dust, particulate, aerosol, mist, fog, or hybrid mixture of these, suspended in the atmosphere, which is capable of being ignited and propagating a flame front.
Diffusion Flame. - ANSWER-A flame in which fuel and air mix or diffuse together at the region of combustion.
Drop Down. - ANSWER-The spread of fire by the dropping or falling of burning materials. Synonymous with "fall down."
Effective Fire Temperatures. - ANSWER-Temperatures reached in fires that produce physical effects that can be related to specific temperature ranges.
Electric Spark. - ANSWER-A small, incandescent particle created by some arcs.
Empirical Data. - ANSWER-Factual data that is based on actual measurement, observation or direct sensory experience rather than on theory.
Entrainment. - ANSWER-The process of air or gases being drawn into a fire, plume, or jet.
Explosion. - ANSWER-The sudden conversion of potential energy (chemical or mechanical) into kinetic energy with the production and release of gases under pressure, or the release of gas under pressure. These high-pressure gases then do mechanical work such as moving, changing, or shattering nearby materials. [Show Less]