NACE CIP Level 1 Exam Questions and Verified Answers| (2023/ 2024 New Update)
QUESTION
When are NACE International surface preparation standards
... [Show More] considered binding?
Answer:
When specified in the contract documents
QUESTION
"Random staining shall be Which Joint NACE/SSPC abrasive blasting standard states that limited to no more than 33% of each unit area of surface"?
Answer:
NACE No. 3/SSPC-SP 6 - Commercial Biast Cleaning
QUESTION
Which blasting standard allows for traces of tightly adherent mill scale, rust and tightly adherent thin coatings up to 10%?
Answer:
Kc) NACE No. 8/SSPC-SP 14
QUESTION
According to NACE No.4/SSPC-SP 7, mill scale, rust and paint are considered tightly adherent if they cannot I removed by
Answer:
D. Lifting with a dull putty knife
QUESTION
ISO 8501 St3 is the standard for which of the following?
Answer:
Very thorough hand and/or power tool cleaning
QUESTION
Which standard requires a "commercial grade" power tool cleanliness?
Answer:
D. SSPC-SP 15
QUESTION
As the inspector called in to verify a blast, you find steel which has scattered tightly adherent rust remalning in less than 5% of the unit area. Which standard has been achieved?
Answer:
D. NACE No. 8/ SSPC-SP 14
QUESTION
Grounding the pump and fluid hose used in airless spray
Answer:
Prevents statie sparking
QUESTION
Duty of Care
Answer:
Caution fellow workers when they perform unsafe acts! Do not take chances! Ank questions when there is any doubt conceming safety! Maintain and use your PPEI Report all unsafe conditions, equipment, or operations!
QUESTION
Remember...
Answer:
Your Safety is Your Responsibility BE CAREFUL SAFETY FIRST
QUESTION
You have been inspecting a tank repainting project and suspect the surface was not cleaned properly but the coating has already been applied. What should you do?
Answer:
Consult the owner for guidance
QUESTION
Documentation
Answer:
Project is not complete until the project documentation is delivered to the owner - Should be delivered as soon as possible after acceptance of work Кеер а сору of records, unless prevented by contractual clauses or otherwise
QUESTION
Define corrosion.
Answer:
The deterioration of a substance, usually a metal from a reaction with its environment.
QUESTION
What is passivation?
Answer:
A layer of oxides formed on the surface of a metal that provides corrosion protection. Stainless Steel for example.
QUESTION
What are the elements of a corrosion cell?
Answer: [Show Less]