The accelerator can be used while backing up at any time - ANSWER-False
The four S's in the vehicle movement checklist are: - ANSWER-Search, signal,
... [Show More] select, steer
Brake fluid is a hydraulic fluid that pressurizes the braking system allowing for the activation of the vehicle's service brakes - ANSWER-True
When selecting the appropriate gear for intended direction of travel, automatic transmission equipped vehicle should be placed in___________while manual transmission equipped vehicles should be placed in___________ - ANSWER-Drive, first gear
The vehicle's speed while backing should only be controlled by: - ANSWER-Depressing and releasing the service brake
The ignition can only be started if the vehicle is in park(for automatic transmission) or neutral (for manual transmission) - ANSWER-True
Which of the following is the first step in leaving traffic on a roadway? - ANSWER-Check traffic and perform visual scan
Which of the following is the last step after leaving traffic on a roadway? - ANSWER-Secure vehicle
When parking on a curb or the side of a road, it is not necessary to use the turn signal. - ANSWER-False
Before backing the vehicle, the driver should turn his/her head to the right and look over the________to the area to the rear and sides of the vehicle. - ANSWER-Head restraint
The first action in starting the vehicle is: - ANSWER-Ensure the parking brake is engaged
Brake fluid leaks do not need special attention. - ANSWER-False
The last action in the vehicle starting procedure (prior to moving the vehicle) is: - ANSWER-Select the appropriate gear
Leaks in the fuel system can occur in the fuel lines or from the tank. - ANSWER-True
For maximum visibility, backing a vehicle requires a driver to: - ANSWER-Physically turn his/ her body
Operating a vehicle with insufficient coolant may result in engine overheating and damage. - ANSWER-True
Which of the following is a possible indication from leaks in the power steering system? - ANSWER-A failure in system's supply lines
A failure in the steering pump
A failure in the steering mechanism
On four door cars, the pillar that connects the rear window to the rear side window or rear door frame is referred to as Pillar D - ANSWER-True
Reaction time is how many seconds it takes the driver's vehicle to pass a target after the vehicle in front has passed it. - ANSWER-False
By targeting and maintaining an effective line of sight, driver are able continuously adjust speed and lane position to maintain an appropriate path of travel. - ANSWER-True
The visual lead should________to counteract high speed of travel - ANSWER-Be increased
Which of the following is the distance a vehicle travels while a driver's foot depresses the brake? - ANSWER-Braking distance
Visual references help to establish appropriate vehicle positioning within a lane of travel and assist in the identification of forward and rear turning points - ANSWER-True
Increasing line of sight and path of travel is a good idea when driving at higher speeds because it helps a driver to remain prepared - ANSWER-True
__________is the vision that judges depth and perception of an environment. - ANSWER-Central
Speed increases the ability of the eyes to accurately assess the driving environment - ANSWER-False
Motorists that follow other vehicles too closely risk a rear-end collision if the vehicle in front were to stop suddenly. - ANSWER-True
The three-second rule is applied in inclement weather conditions such as rain and snow - ANSWER-True [Show Less]