Inspections correct answers -Identify or eliminate hazards
-Check compliance with organizational & regulatory standards.
-Determine the safety & health
... [Show More] conditions in the work place.
-Assess safety programs
PDCA correct answers Plan, Do, Check, Act
Inspection Procedures correct answers Purpose, Scope, Responsibilities & activities of inspection.
Hazard types correct answers physical, chemical, biological & phycological
Audit correct answers -Proactive
-Emphasizes prevention efforts more than loss experience.
Likert Scale correct answers Quantifiable score to show risk level of an audit.
Law & Ethics correct answers Law-Minimum standards set
Ethics-Highest standards set for a profession
BCSP Code of Ethics-HBIUACAS correct answers 1.) HOLD paramount the safety and health of people, the protection of the environment and protection of property in the performance of professional duties.
2.) BE honest, fair, and impartial; act with responsibility and integrity
3.) ISSUE public statements only in an objective and truthful manner
4.) UNDERTAKE assignments only when qualified by education or experience in the specific technical fields involved.
5.) AVOID deceptive acts that falsify or misrepresent their academic or professional qualifications
6.) CONDUCT their professional relations by the highest standards of integrity and avoid compromise of their professional judgment by conflicts of interest.
7.) ACT in a manner free of bias, discrimination or harassment on the basis of race, color, etc.
8.) SEEK opportunities to be of constructive service in civic affairs and work for the advancement of the safety, health,
Machine Guarding-3 Main Parts correct answers 1.) Point of operation-work is performed on materials (Most Dangerous)
2.)Power transmission drive-all components that transmit energy
3.)Operating Controls
Machine Hazard Analysis correct answers Consider relationship between work, the environment, the tools & the task at hand.
Lockout/Tagout-Hazardous Energy Controls Program correct answers A formal procedure for taking equipment out of service and ensuring that it cannot be operated until a qualified person has removed the lockout or tagout device (such as a lock or warning tag).
Machine Protection Methods correct answers -stopping machine
-restraining/withdrawing operators hand
-requiring both hands on machine to operate
-providing synchronized barrier.
photoelectric sensing safeguard correct answers light source, electric eye or curtain that stops machine when the light field is broke.
Radiofrequency safeguard correct answers radio beam, if broken will stop machine
Electromechanical Sensing safeguard correct answers probe or contact bar which descends to the present distance and when obstructed shuts down machine.
Sound & Noise Measurements correct answers A-A sound level meter weighting that makes its readings conform to a notional human hearing response. It is defined in various international standards such as the IEC 61672, as well as in various national standards such as ANSI S1.4.
C- looks more at the effect of low-frequency sounds on the human ear compared with the A-weighting and is essentially flat or linear between 31.5Hz and 8kHz, the two - 3dB or 'half power' points.
Z- flat frequency response of 8Hz to 20kHz (+/- 1.5dB), this is the actual noise that is made with no weighting at all for the human ear (Z for zero). Often used in octave band analysis and for determining environmental noise.
Wave length correct answers Distance traveled by a sound wave during a sound cycle.
Measure in meters or feet.
Frequency correct answers measure the number of vibrations per second.
Measured in hertz (HZ) where one HZ equals one cycle per second.
decibles correct answers a measure of how loud a sound is (its intensity)
Sound Health Effects correct answers -Noise induced threshold shifts.
-Acoustic trauma
-Tinnitus
Sound modification correct answers Process by which acoustic waves are received by outer ear & are directed to the eardrum.
Process change
Recommended Exposure Limit (REL) correct answers Exposure limit; generally a time-weighted average; developed by NIOSH.
85 decibels at 8 hour average-World Wide Standard
90 decibels at 8 hours average-OSHA standard
Sound Exchange Rate correct answers For every 3 decibel increase in noise level, the allowable exposure time is reduced by half.
Sound pressure level correct answers A designation used to indicate that the reference pressure used for calculating a tone's decibel rating is set at 20 micropascals, near the threshold in the most sensitive frequency range for hearing.
5 Hearing Safety Engineering Controls correct answers 1.)Modification- Modify o replace existing equipment
2.)Retrofit-Add sound protection to an existing operation.
3.)Relocation-relocate workers or high decibel equipment.
4/5.) Path & Receiver Treatment-PPE & Noise absorbing materials place in path of sound.
5 Performance Metrics (SMART) correct answers 1.) Specific
2.) Measurable
3.) Attainable
4.) Relevant
5.) Time Based [Show Less]