When starting up the Hydraulic System, the ....... must be used. - Answer- EOSS
Hydraulic systems are used to operate the ....... - Answer- STEERING
... [Show More] GEAR
If you apply 100 pounds of force to a 1 inch piston, the 2 inch output piston would have ....... pounds of force. - Answer- 200
Hydraulic system pressure is maintained by the ....... valve - Answer- UNLOADING
Which component is used to convert fluid power energy to mechanical motion? - Answer- ACTUATOR
The centrifugal type LP air compressor is used in systems of up to ....... psig. - Answer- 125
High Pressure air is defined as ....... psig air or greater - Answer- 1001
(True/False) Compressed air systems that operate between 1005 to 2005 psig are classified as medium-high pressure air systems - Answer- FALSE
The compressed air system that operates at 160 psig is classified as a ....... pressure system. - Answer- MEDIUM
Most low pressure compressors have ....... stages. - Answer- 2
Most high pressure compressors have ....... stages - Answer- 4-6
The Type 1 Dehydrator removes contaminants from ....... pressure compressed air systems. - Answer- LOW
On the Type 1 Dehydrator the high temperature alarm indicates a loss of proper ....... - Answer- REFRIGERANT TEMPERATURE
The term CLEAR refers to ....... - Answer- ABSENCE OF VISIBLE PARTICULATE MATTER
At what point in the sump are sample connections fitted? - Answer- LOWEST POSSIBLE POINT
The sample line cap prevents ....... of the sample line - Answer- CONTAMINATION
Unsatisfactory lube oil sample or machinery sump oil is determined to be unsuitable for renovation by the ....... - Answer- ENGINEER OFFICER
While starting the lube oil purifier the ....... is used. - Answer- EOSS
The normal operating speed for the DeLaval Purifier is ....... rpm - Answer- 7200
The DeLaval Purifier is driven by ....... - Answer- ELECTRIC MOTOR
The DeLaval Purifier cover clamps hold the cover down to the frame and seals it with a/an ....... gasket. - Answer- O-RING
Current levels as small as ....... milliamps can prove fatal. - Answer- 100
Small ships have fireplugs placed so that any area on the ship can be reached with ....... feet of a fire hose. - Answer- 50
Insufficient fire main pressure, while operating an eductor, could result in ....... - Answer- BACK FLOODING
What color is the GENERAL alarm Switch? - Answer- RED
What watch takes readings on equipment in the Main Space when the ship's engineering plant is secured? - Answer- COLD IRON WATCH
How are "Out of Specification" readings annotated on the log? - Answer- CIRCLE IN RED AND ANNOTATE IN REMARKS
What are used to alert personnel to an action or series of actions that, if not strictly adhered to, may result in injury to personnel? - Answer- WARNINGS
(True/False) Personnel Qualification Standards (PQS) is a way of documenting a person's demonstrated minimum knowledge and skills required for a qualification. - Answer- TRUE
What document contains maintenance procedures pertaining to all equipment in a command? - Answer- PMS MASTER FILE
Requirements needed to combat a hazardous material spill are found in the ....... - Answer- MSDS
What document must be posted by the entrance of a fuel oil tank before personnel are allowed to enter? - Answer- GAS FREE CERTIFICATE
Chipping paint, sandblasting, and other dust producing operations require ....... protection. - Answer- EYE
(True/False) Double hearing protection is required when impulse/impact noise levels are 140 db or greater. - Answer- FALSE
The first priority when administering first aid is to ....... - Answer- MAINTAIN BREATHING
What type of tank holds fuel as it is loaded on the ship before it is cleaned for use? - Answer- STOWAGE TANK
What electrical tools must have a three-pronged plug on the power cord? - Answer- METAL CASED
Which valve is ideal for throttling fluid flow? - Answer- GLOBE
What type of pump uses the throwing force of a rapidly revolving impeller? - Answer- CENTRIFUGAL
Which type of fitting absorbs motion/vibrations between machinery and piping systems? - Answer- FLEXIBLE HOSE ASSEMBLY [Show Less]