POP markings shown on the ammo can are required on all _________________ even when its not ammo. - ANSWER-Hazardous Materials
What purpose does banding
... [Show More] serve? - ANSWER-Holds the contents of the pallets in place so they do not fall or become looser
Which item shows a fiber container? - ANSWER-its the 3rd one or the one that's like white wrapping and looks like bricks of yayo barrier bags look like space MREs and the Hermetically Sealed Cans are cans
In the image below the FSC is "1370" and the DODIC is "L477". when combined what do they represent? - ANSWER-Lot Number
Why is color coding on ammunition and packaging so important? - ANSWER-To identify hazard type and the use of the ammunition item.
Select the statement that best describes the purpose of an inner pack - ANSWER-Provides another layer of protection.
Drag the correct caliber ammo to the correct inner or outer pack - ANSWER-Look at the Nomenclature
Just from looking at this angle what is wrong with this image? Select all that apply - ANSWER-There are no markings.
Items are not packed correctly.
Items are not secured correctly.
What is the significance of the Nose End marking on a rocket or missile? - ANSWER-Determines which way to point the pallet or outer container.
Based on the color coding is this a service or training bomb - ANSWER-Olive drab indicates the ammo contains explosives.
Blue indicates the ammo is use for training or practice.
Is this a service or training mine - ANSWER-Blue means its training yellow bands or markings mean its got high explosives in it
Select the item from the left that is part of the system that ejects the pilot from the aircraft - ANSWER-The Thruster Cartridge
(The metal looking piece)
the purpose of operational security is to create and maintain the safest work environment possible by _____, ______, and ______. - ANSWER-Reducing injuries, preventing damage, saving lives.
The cardinal rule states that all operations must expose the number of _____ for the minimum amount of _____ to the minimum amount of ______ to be consistent with safe operations. - ANSWER-people, time, explosives.
What is the primary purpose of an SOP - ANSWER-To protect lives and prevent injuries
What do these signs mean - ANSWER-Turn off 2-way radios and cell phones
Put the name of the facility to the box below the image it represents - ANSWER-matchy game
1= Mass Detonation
2= Explosion w/ fragments
3= Mass Fire
4= Moderate fire
Which of these is NOT included in good housekeeping practices at ammo facilities - ANSWER-Keep lunch and food items near the door
What chemical and fire systems are displayed? - ANSWER-White phosphorus and flame producing, mass detonation
When is it acceptable for vehicles transporting ammunition to carry essential personnel like military police (MPs) or explosive ordinance disposal (EOD) technicians? - ANSWER-When specific requirements are met.
How many fire extinguishers are required on trucks transporting ammo on post - ANSWER-Two (2)
You are loading a truck transporting ammunition with a hazard classification of 1.4. Which placards should be on the vehicle? - ANSWER-the one that says 1.4 or the fire symbol that says a 4 and its on a tilted square
What are the six uses of ammunition? - ANSWER-1. Damage
2. Conceal
3. Illuminate
4. Communicate
5. Training
6. Other
Vehicle inspections - ANSWER--Fire extinguishers are serviceable.
-Electric wiring is in good condition.
-Fuel tank and lines are secure and not leaking.
-Brakes, steering, and other equipment are in good condition.
-The exhaust system is clear and away from combustible materials.
Who inspects the vehicle - ANSWER-"Inspections are different, too. Your vehicle must be inspected by a qualified inspector each time ammo is transported off-post. "
What does "ammo compatibility" mean? - ANSWER-What ammo can be stored together.
You are loading a truck transporting ammunition with a hazard classification of 1.3. The truck now has 1.1 on it. Whose responsibility is it to ensure the right placards are on the vehicle to match the ammunition being transported? - ANSWER-The driver
The onsite supervisor or NCO
Everyone Involved
What are placards? - ANSWER-Hazardous signs and symbols
Do all areas and facilities storing or handling ammo require a lightning protection system (LPS)? - ANSWER-Yes
You are delivering a load of ammunition to the demolition grounds today but the gate is locked and a red flag is flying. What do you do? - ANSWER-Not enter, turn around, and wait until it is clear
You enter a storage facility and find this on the floor. What should you do? - ANSWER-Notify a supervisor or NCO immediately.
Which statement about ECMs and AGMs is NOT true? - ANSWER-Both provide equal cost effectiveness.
You report to a workshop to pack hazardous materials. What tools would you use? - ANSWER-Tools required by the SOP
What do markings identify on ammunition? - ANSWER-Ammunition type
Select all that are inner packs. - ANSWER-Cardboard cartons
Fiber containers
Styrofoam
Bubble wrap
Wood block fillers
What is the purpose of a seal? - ANSWER-Show if pack has been opened and not resealed.
How are outer packs stacked? - ANSWER-To fit the pallet
What is the purpose of pallets? Select all that apply. - ANSWER-To store ammo
To move ammo
For easier handling of ammo
Which of the following applies to training ammo? Select all that apply. - ANSWER-Training ammo is used for practice.
Training ammo contains explosives.
Training ammo is capable of damaging property and personnel.
Follow safety precautions when handling training ammo.
What proper actions are taken when a seal is missing or broken from an outer pack? - ANSWER-Report any unsealed outer packs to your supe [Show Less]