When designing a new multi-story government Special Access Program Facility (SAPF), the
architect provided identical drawings for two three-story
... [Show More] buildings to the security officer. One
drawing is for a building on the installation to be occupied only by contracting Company X. The
other is for the command headquarters building on the installation.The design reveals floor-toceiling windows on the second floor for the main conference rooms and front office staff. The
drawings indicate a parking lot adjacent to the building separated by a four-foot-wide, handicapaccessible sidewalk. The architect placed emergency exits and stairwells at each end of the
building with door hardware on the exterior to facilitate access/egress. The floor plans show
interior office and conference room doors with GSA-approved locks and connectivity to the
building access control badge system. The front door drawings indicate a large safety glass key
lock entry door with the unit logo and designation etched in the glass. The single entry door
provides access into the building lobby where visit control staff will greet people and in-process
visitors. The plans identify lock boxes to be placed inside the lobby for visitors and employees to
store their electronic digital devices and other prohibited items. The architect designed an open
lobby leading to interior hallways, an elevator and access to the stairways. He placed the access
control system central processing unit (CPU) behind the visit control desk. Typically, the CPU is
located in the dispatch center.
As a result, which of the following is true regarding the placement of the CPU?A. It may remain in the building lobby because the doors serve as adequate access control.
B. It must be in an area designated as a Restricted Area.
C. It must be in an area designated as a Sensitive Compartmented Information Facility.
D. It should be moved to an area on the second floor or above, but does not need to be in a
Restricted Area. ✔✔B. It must be in an area designated as a Restricted Area
True or False. Hinge pins that are located on the exterior side of emergency exit doors in the
SAPF must be spot welded or have set screws installed to prevent removal of the door. ✔✔True
Which of the following man-made barriers could be an appropriate measure to impede vehicle
passage between the parking lot and the building?
A. Bollard or chain link fence [Show Less]