standards for crane safety can be found in CORRECT ANSWER a. 29 cfr 19 subpart cc
which of the following is an employer requirement CORRECT ANSWER d.
... [Show More] all of the above
you must assure your crane is stable by each except CORRECT ANSWER b on-board seismograph
load charts must CORRECT ANSWER b. indicate rated lifting capacity ad be visible to operator
an annual inspection of each crane is CORRECT ANSWER d all of the above
cranes must maintain a min of ___ feet away from pier lines CORRECT ANSWER c 10'
which of the following is never true of rough terrain cranes CORRECT ANSWER b. great ability to maneuver with load
which two cranes typically use lattice boom CORRECT ANSWER d truck mounted, crawler
which crane type typically has the highest combined capacity for reach and weight CORRECT ANSWER A. crawler conventional
which the of crane is known as a conventional crane CORRECT ANSWER c crawler
side loading the bomb can occur when CORRECT ANSWER d all of the above
If any part of a rt crane tire touches the ground before a lift you should CORRECT ANSWER b recheck load chart
outriggers should CORRECT ANSWER b lift cranes tires clear of ground
the headache ball and hook are attached to the whip line by a wedge socket CORRECT ANSWER a. true
each of the following is true for lattice boom except CORRECT ANSWER d. frequently used on rough terrain cranes
a truck mounted crane with a hydraulic boom CORRECT ANSWER c. requires solid level surfaces for setup
lattice sections cannot be added or removed from lattice cranes (true or false) CORRECT ANSWER b false
short lattice boom CORRECT ANSWER d. all of the above
The counterweight swing area of a crawler crane must be flagged off if there is any possibility of employee injuries from being hit by o pinched CORRECT ANSWER A true
Crawler cranes can operate at CORRECT ANSWER c 360 degrees
Being ___ is critical for long boom on crawler cranes CORRECT ANSWER C. level
a critical pick is one exceeding ___% of the load chart value CORRECT ANSWER A. 75
On-board computers will do each of the following except CORRECT ANSWER d. replace the load chart
load chart values can pinpoint failures of CORRECT ANSWER c structure or stability
above the heavy line crossing the load chart are values for failure in CORRECT ANSWER b. structure
after safety related modifications have been made to crane the equipment must be inspected by CORRECT ANSWER a qualified person
certain inspections of crane equipment may be made by an CORRECT ANSWER d competent qualified
under osha construction requirement for crane and derricks when a crane operator is employed CORRECT ANSWER c crane operator’s employer
those who work on a crane or new crane operations must be trained CORRECT ANSWER d all
hoists shall be CORRECT ANSWER d. all of the above
Hoist should be inspected CORRECT ANSWER A. daily
do not perform maintenance on a conveyor until CORRECT ANSWER a. all hazardous energies are disconnected and blocked
daily inspections need to include CORRECT ANSWER b. checking of the wire rope for damage or caging
inspections of hoist should include CORRECT ANSWER d both a and b [Show Less]