Mold Assessment Consultant Exam New Updated 2024 With
Correct Questions and Answers GRADED A+
EPA's, "Mold Remediation in Schools and commercial
... [Show More] Buildings" full containment is generally
recommended for areas involving greater than _______ sq. ft of mold contamination. - 100
If using a full containment, where should your respirators should removed? - Outside
decontamination chamber
EPA, which of the following is NOT a cleanup method used for remediating damage to building
materials that have mold growth? - scraping
Wet Vacuums should NOT be used to remove water from: - Wallboard
A ________ is a control device that can be connected to an HVAC system and adjusted so
that is the humidity level rises above a set point, the HVAC system will automatically turn on
and reduce the humidity below the established point. - Humidistat
Fungi account for ______ of infections originating or taking place in a hospital. - 9%
Molds may adversely affect human health through what process. - Allergy, Infection and
Toxicity
Molds are dependant upon external food sources because they lack: - Chlorophyl
____________ also know as "toxic mold" elicits great concern when found in homes, schools
or offices because of its capability of producing mycotoxins: - Stachybotrys chartarum
Mold is ubiquitous. Ubiquitous= existing everywhere, all over at the same time, like air. -Yes,
True
What is the primary factor that controls mold growth indoors? - Availability of moisture
According to state regulation (Texas)Mold Remediation Rules, an owner or their employees
are NOT required to be licensed to perform mold remediation on a residential property they
own and has fewer than ______ dewelling units. - 10
TMRR, Stop Date is defined as - The date following a day on which final clearance is achieved
following a mold remediation project.
TMRR, a person whose license has expired for more than ______ ___________ must obtain a
new license and must comply with current requirements, including any state examination
requirements. - 6 months or 180 days
TMRR, a Mold Assessment Tech (MAT) is NOT licensed to: - Develop a Mold Management Plan
or a Mold Remediation Protocol.
TMRR, the air pressure within a walk-in containment must be ________________ the
pressure in building areas adjacent to the containment. - Lower than
TMRR, signs advising that mold remediation project is in progress shall bear the words: -
Notice; Mold remediation project in progress.
TMRR, the signs should be what size and colors - 8X10, black letter on a yellow background.
TMRR, for a remediation project to achieve clearance, a ____________ __________
_______________ shall conduct a post remediation assessment using visual, procedural, and
analytical methods. - Mold Assessment Consultant
TMRR, Not later than ____ ____________ after completion of a mold remediation project, the
licensed mold remediation contractor or company shall provide the property owner with
copies of required photographs of the scene of the mold remediation taken before and after
remediation - 1 week
TMRR, not later than the ________ day after the project stop date, the licensed mold
remediation contractor or company shall provide a certificate of mold remediation to the
property owner on a form adopted by the Texas Commissioner of insurance. - 10th day
TMRR, Which of the following is NOT an example of a critical violation ( Level 1) - Working with
a credential or ID card that has been expired for one month or less.
TMRR, a person whose application or credential has been revoked shall be ineligible to
reapply for any mold-related credential for up to _____ ___________. - 2 years
TMRR, a person seeking to renew a license, registration or accreditation shall submit a
renewal application no sooner that _______ days before the credential expires. - 60
TMRR, a serious violation (Level II) assessed by DSHS can carry a fine up to ________ per
violation. - $2500
TMRR, remediation worker training shall consist of a least ____ ________ of training. - 4
hours [Show Less]