IICRC - Commercial Drying Specialist 2023 New Generation 100% Topscore pass!!! Exam Questions and Verified Correct Answers
The principles of restoration
... [Show More] as described by the S500 on a restoration project are... - CORRECT ANSWER>>1) Provide for the safety & Health of Workers and Occupants 2) Inspect and Document the Project (initial / ongoing inspection / final inspection) 3) Mitigate further Damage (control the spread of contaminants, control the spread of water) 4) Clean & Dry Affected Areas 5) Complete the Restoration & Repairs (remove excess water, enhance evaporation, remove water vapor through dehumidification and ventilation & control temperature)
Describe at least 3 characteristics of commercial drying projects that make it different from typical residential ones - CORRECT ANSWER>>size & complexity of mechanical and HVAX systems // building electrical systems vary in complexity, amount of voltage and training required to qualify for working on this equipment // energy management systems // challenges related to public access and security are typical // multiple stake holders on a. commercial project // commercial construction practices, materials and codes are complex and varied
How does the S500 describe the following type of building - commercial? - CORRECT ANSWER>>commercial = buildings or facilities where the use is primarily for retail, office, mixed-use and warehousing.
How does the S500 describe the following type of building - industrial? - CORRECT ANSWER>>industrial = buildings or facilities where the use is primarily for manufacturing, foundry or distribution
What other details are there about the following type of building - commercial? - CORRECT ANSWER>>power may be single phase or 3 phase, but is usually lighter than any of the other categories // the use of the building will dictate the build-out density, materials and HVAC systems used
What other details are there about the following type of building - industrial? - CORRECT ANSWER>>(will have more than sufficient power and with 3 phase power generally available // the problem in these buildings are the safety regulations, in some, it may take a full day or more to be trained and approved to enter the facility // in some access, access is usually very tightly controlled and require escorts // typical of many buildings in process or manufacturing facilities are raised-floor environments to allow changes in cabling, power distribution and process control lines) [Show Less]