Class B network range - ANSWER 128 - 191
A known issue has been identified in the BIG-IP system. A software fix is available to the public. What is
... [Show More] this software fix called? - ANSWER Hotfix (maybe)
TMSH command to create a management route - ANSWER create /sys management-route default gateway 129.168.1.254
Which network protocol should be used for translating network layer addresses into link layer addresses?
ICMP
ARP
DHCP
MAC - ANSWER ARP
Four computers are distributed in two separate VLANs connected to a single layer 2 switch.
Which traffic is sent to the router for processing?
no traffic because computers are on the same switch
only traffic between computers on separate VLANs
only traffic between computers on the same VLAN
all traffic between all computers - ANSWER no answer
Administrator needs to separate one broadcast domain into four.
Which device will accomplish this task in an economical way?
firewall
ADC
switch
hub - ANSWER switch
What HTTP Response code error occurs when a web server is currently unable to handle any requests due to a temporary overloading and maintenance?
503 Service Unavailable
600 Busy Everywhere
403 Forbidden
304 Not Modified - ANSWER 503 Service Unavailable
A BIG-IP Administrator needs to identify the CVE vulnerabilities from a BIG-IP using the iHealth Diagnostic Tool. Which utility should the administrator use to automatically collect configuration and diagnostic information from the BIG-IP?
system check
platform_check
ucs
qkview - ANSWER qkview (maybe)
A BIG-IP Administrator has five VLANs that must be assigned to a single interface.
What is the minimum number of VLANs that need to be set as 'tagged'?
1
0
4
5 - ANSWER 1 (maybe)
A Network Administrator wants to check the number of TTL iterations and transmissions of a web server on an IPv6 network. Which IPv6 header field is equivalent to IPv4's Time to Live field?
Payload Length
Next Header
Flow Label
Hop Limit - ANSWER Hop Limit
An organization is having an issue with slow speed in the network. The BIG-IP Administrator needs to combine multiple physical network connections in one logical link connection.
Which protocol should be used to achieve this task?
802.11ac
802.1q
802.1s
802.3ad - ANSWER 802.1q
Which type of error is duplex mismatch?
Application
Network
Protocol
Service - ANSWER network (maybe)
A router has two routes to the same destination network: a static route with a metric of 60 and a directly connected route with a metric of 0.
Which route would be used to forward traffic?
Connected Route
Static Route
Default Route
Traffic would be dropped - ANSWER Connected Route (maybe)
Which severity level are notify messages logged on a BIG-IP device?
4
5
6
3 - ANSWER 5
A host with multiple routes including a default route determines that a packet is destined for a remote network.
How would the host pass the traffic?
The host would use the route with the longest match.
The host would only check its ARP table and pass the traffic to the destination.
The host would pass the traffic to the loopback interface.
The host would drop the traffic. - ANSWER The host would use the route with the longest match.
Which technique is used to separate packets from multiple VLANs across a single physical link?
port-based VLANs
Spanning Tree Protocol
VLAN tagging
WAN encapsulation - ANSWER VLAN tagging
Which two components are required to enable a full proxy to offload SSL connections? (Choose two.)
RSA Cipher
Passphrase
Certificate
Key
Digital Fingerprint - ANSWER Certificate & Key
After a successful software upgrade to the members of a pool in the BIG-IP appliance, users are unable to access their web portals and receive the following error message: "This page can't be displayed."
Pool members have black diamond status icons.
What is causing this issue?
The pool is down.
The pool is inactive.
The pool is forced offline.
The pool is disabled. - ANSWER The pool is disabled.
Which tool should a BIG-IP device use to log actions performed by administrative users on an external server?
Syslog
Netflow
Reliable Event Logging Protocol (RELP)
Simple Network Management Protocol (SNMP) - ANSWER syslog (maybe)
A BIG-IP Administrator is unable to reach a server in the same subnet network. The server and administrator's workstation is connected in the same switch, and ports are up. The workstation is configured with 10.10.1.2/25, and the server is configured with 10.10.1.120/25.
Which command should the administrator execute to verify layer two mapping? [Show Less]