The Certificate of Fitness holder must keep the Certificates of Fitness upon his or her person, or otherwise __________________ for inspection by any
... [Show More] representative of the Department, at all times while conducting or supervising the material, operation or facility for which the certificate is required.
Readily Available
Permits issued by the FDNY are required to conduct the following hot work:
1)Storing, Using or Handling Oxygen and a Flammable gas
2) LPG or CNG or Acetylene in excess of 400 SCF
3) Any oxidizing gas in excess of 504 SCF
Portable LPG containers that are more than ____________ must NOT be stored, handled, or used indoors
16.4 oz
CNG containers with a capacity greater than ____________ must NOT stored, handled, or used on the roof
8.7 SCF
Use of LPG/Propane on an occupied roof requires an ____________________ from licensed professional ___________________ stating the roof is constructed of ________________________
Affidavit, Architect or Engineer, non-combustible materials
Any single standard portable LPG container must not exceed _______________ in weight
100 LBS
Any single CNG container must not exceed ______________ SCF
381
Such permit authorizes the permit holder to store, handle, or use flammable gases, or conduct a torch operation at a specific premises or location called?
Site-specific permit
A ____________________________ may be a permanent permit or a temporary permit.
Site-specific permit
Under _______________________________ a permanent permits are valid for ___________only
Site-specific permit, 12 months
Under ________________________a temporary permit may be valid from _______to____________ depends on the construction/operation need.
Site-specific permit, 1 day to 12 months
Such permit authorizes the permit holder to store, handle, use or sell hazardous material or conduct an operation on a citywide basis is called?
Citywide permit
Such permit is valid to temporarily store, handle, use or sell hazardous materials or to conduct an operation at one or more locations is called?
Citywide permit
Citywide permit the duration of such activity at any individual location does not exceed __________________ days
30 calendar
Periods of activity in excess 30 calendar days at any one location shall require a __________________________
Site-specific permit
What should be readily available on the premise for inspection by Fire Department representatives?
Any and all permits
Hot work program authorization is NOT issued by the FDNY, it must be signed and issued by the __________________
Responsible person
Hot work shall be available for inspection by any representative for ______________ after the work is completed
48 hours
For hot work operation with citywide permit, the owner of the premises of the hot work operation areas must be notified in writing by the citywide permit holder at least ______________ the hot work is to be started
48 hours before
Before hot work is authorized and at least _______________ while the authorization is in effect, the hot work area shall be inspected by the responsible person
once per day
The pre-hot work check must be conducted by the ________________ before hot work is authorized and at least ____________________
responsible person, once per day
Hot work area must be kept ___________ feet away from any combustible materials and combustible waste
35 feet
All other hot work operations shall be conducted at least _____________ feet away from any combustible materials and combustible waste
25 feet
Sprinkler system protection ___________________________ while hot work is performed.
must not be shut off or impaired
Gas Torch Operation Precautions
Each person must operate only one torch at a time and such torch must not be left unattended while ignited
Protection of Combustibles
Areas designed for hot work operations shall have floors with noncombustible surface
Paper, wood shavings, straw and fabric are examples of ________________________
combustible materials
Hot work operations involving cutting or welding shall be conducted at least __________________ from combustible materials and combustible waste
35 feet
____________________ shall not be allowed to accumulate on floors and other surfaces within the hot work area.
Combustible waste
Prohibited cutting or welding when ________________________
supported by or resting on any compressed gs containers
Compressed gas containers must be replaced when __________________
They are empty
Empty containers must be handle in the same manners as __________________
full once
A ________________ must not be rolled on its side or its rim
Compressed gas containers
Fire Watch Requirement
A fire watch must be maintained during any hot work operation
Person conducting a fire watch ______________
shall not have other duties
Fire Guard vs Fire Watch
-important to understand the code required distinction between fire watch and a fire guard-not all individuals responsible to maintain a fire watch must possess an f-60 certificate of fitness
Under Fire watch at least once portable fire extinguisher with minimum _______________ rating must be readily available within __________ feet travel distance of the location
2-A:20-B:C, 30 feet
Under fire watch torch applied roof systems, a minimum _____________ rating fire extinguisher readily available
3-A 40-B:C
Torch Applied Roof-System
Bituminous roofing systems using membranes that are adhered by heating with a torch and melting asphalt back coating instead of mopping hot asphalt for adhesion.
Under Time and Record keeping for any CNG or LPG torch operation timing, ___________
the first inspection shall be conducted 30 minutes after completion of torch operations; the second inspection 1 hour after completion of torch operations
The fire guards or fire watch personnel must complete a signed inspection report (or the log book). This report must be submitted to and retained by the person in charger of the torch operations. The log book should be_________________
maintained on the premises for 48 hours after work is complete [Show Less]