In a modernization they plan on moving the controller 30 feet away which ends up resulting in a voltage drop. What do you do? A) Call electric company for
... [Show More] a step-up transformer, B) Use a bigger wire. Correct Answer: B) Use a bigger wire.
Governor trips at 115% of rated speed, the over speed switch trips at 90% of the 115%. Correct Answer:
If you are cutting something with a power saw, which way does piece you are cutting face. Up or down? Correct Answer: Down.
They give you a voltage of 480 on primary and 216 on secondary and a current. What transformer would you need to order? 1KVA 1to1, 2KVA 2to1, or 3KVA 2to1? Correct Answer: 2KVA 2to1
You have 15 full 16lob rails, and two 8' sections. How much do they weigh? Correct Answer:
Static load test - car drifts down 15 inches in ten minutes with no noticeable oil leak. Where is the most likely leak? Correct Answer: Underground
You need to reset the step level switch on an escalator. Where is it located? A) top B) bottom C) Both. Correct Answer: C) Both
What is needed for a false platform? Correct Answer: False cars require spring-loaded safeties held in locked position and barricades and netting on top, 600-pound capacity. A working platform requires the governor to be installed, and to be counterbalanced correctly.
3 cars, 12 floors. 3 floors do not get PIs. How many PIs do you order? Correct Answer: 27 PIs.
The should you a call button wirting diagram with 3 floors, up and down with a common and ground wire. How many wires are needed to wire it? Correct Answer: No answer noted.
Where would you look for how many fixtures you need for a job? Correct Answer: Abstract
PI goes out too fast at 2nd floor, what contacts are problem on print? Correct Answer:
What percentage of accidents are alcohol related? Correct Answer: 75%
What is an ok substitute for a top rail for a barricade? A) 1/4 inch wire rope, B) 1/4 steel banding, C) 3/16 nylon rope Correct Answer: A) 1/4 inch wire rope
What is the tolerance of a barricade? Correct Answer: 2" [Show Less]