Certified Playground Safety Inspector CPSI Sample Exam Questions and Answers 2024.
To be compliant with ASTM 1487, a designer or manufacturer of
... [Show More] playground equipment
should - Correct answer-provide buyers with a parts list for the playground
2. The fish or wedge probe is used to determine whether or not a hazard exists on -
Correct answer-a partially bounded opening
3. Which of the following is correct regarding the impact-attenuation of surfacing
material - Correct answer-Critical height must equal or exceed fall height
4. When evaluating the structural integrity of a support structure for a swing that
appears to be failing, a CPSI should - Correct answer-hire a licensed professional
engineer to certify the integrity of the equipment
5. Manufacturers of playground equipment must: provide the manufacturer's
identification of the equipment - Correct answer6. The majority of injuries associated with playground equipment result from - Correct
answer-falls to the surface on which the equipment was located
7. An opening may present a common crush or shear hazard only if it - Correct answergrabs the 5/8" (16mm) dowel
8. The criteria for unitary surface materials includes meeting requirements of - Correct
answer-ASTM F1292 and F1487
9. Regarding playground safety signage, which of the following is correct - Correct
answer-Signage may not prevent accidents but may reduce liability
10. Which of the following factors is MOST important when determining the frequency of
inspections of surfacing - Correct answer-Type of surfacing and amount of use
11. When planning a playground for public use, the play equipment that is chosen must
- Correct answer-be appropriate for the age of intended users
12. A spring rocker with seat height of 26" is about to be installed adjacent to the side of
a fully enclosed bucket swing set. The minimum distance required between the swing
set and the rocker is - Correct answer-108" or 9'. [Show Less]