SNT-TC-1A is not intended to be used as a strict specification.
Which of the following statements is true concerning the usage of
... [Show More] SNT-TC-1A?
Written and stated in general terms
The SNT-TC-1A Interpretation Panel will respond to inquiries about SNT-TC-1A. The inquiry must be:
May engage an outside service but is, nevertheless, responsible for the certification of the company's NDT personnel
With regard to the training of NDT personnel, the employer:
To establish their own written practice for the qualification and certification of their NDT personnel
SNT-TC-1A is intended as a guideline for employers:
The employer should review the detailed recommendations and modify them, as necessary, to meet its particular needs.
The following is a statement in SNT-TC-1A "It is recognized that these guidelines may not be appropriate for certain employers; circumstances and / or applications." What should be done if the guidelines are not appropriate?
The individual's employer.
Who should be responsible to assess whether or not an individual should be qualified and certified who does not perform NDT, but monitors and evaluates NDT?
Holographic testing
To which of the following NDT methods is SNT-TC-1A currently not applicable
With flexibility and reason
ASNT intended that the recommendations of SNT-TC-1A be applied
The employer.
Of the following, which is most appropriate to determine the needs to qualify and certify personnel whose only NDT function is to operate digital thickness equipment.
Written testimony of qualification.
Certification is
It has been specified by the customer.
Use of SNT-TC-1A is mandatory when:
Level I, Level II and Level III.
The basic levels of qualification recommended by SNT-TC-1A are:
Weather any NDT personnel should be qualified and certified depends solely upon the needs of the employer and the requirements of the employer's customers or clientele.
Should personnel that operate ultrasonic digital thickness measurement equipment to qualified and certified
The Trainee may not conduct nondestructive test independently and may not report test results
According to the recommendations of SNT-TC-1A which of the following is true concerning a Trainee's activities?
Must train and examine the Level I and II personnel in his or her organization.
According to SNT-TC-1A, which of the following is not true for a Level III?
Specific calibrations, Specific nondestructive test, specific evaluations.All of the above and record test result
According to written instructions, an NDT Level I may be qualified to perform:
Yes, the intent in SNT-TC-1A is that the Level I may perform the above functions provided that they are in accordance with written instruction of a Level III or designee.
May a Level I independently perform, evaluate and sign for results of nondestructive test with supervision and guidance from a Level II or III?
The qualifications for Level III equal and exceed those of Level II.
Which of the following statements is true concerning the definitions of Trainee, Level I, II and III in SNT-TC-1A?
Establish techniques
Which of the following is not within the scope of activities of a Level II individual, as recommended in SNT-TC-1A?
May conduct on-the-job training and guidance of Level I personnel.
As recommended in SNT-TC-1A, a Level II:
The Level III shall be capable of evaluating test results in terms of codes, standards and specifications.
According SNT-TC-1A which of the following is true for a Level III?
The employer.
In Accordance with SNT-TC-1A, who is responsible for establishing a written practice for the control and administration of NDT personnel training, examination and certification?
Should be described in the employer's written practice under all circumstance.
The responsibility of each level of certification for determining the acceptability of materials or components:
Training, experience and education.
What factors are to be considered to ensure that a candidate for certification in NDT understands the principles and procedures involved?
SNT-TC-1A does not currently provide a recommendation regarding overtime.
As recommended in SNT-TC-1A, which of the following is true?
None of the levels
High school educations are recommended as a minimum requirement for:
Differs for each of four major techniques.
In Leak testing, recommended work time experience and training:
graduation from a 4-year university or college with a degree in engineering or science college or university plus 1 years' experience in NDT comparable to that of a Level II.
It is recommended that the education and experience of a Level III candidate include
hourly basis.
Records substantiating training and experience for qualification are recommended to be kept on a(n):
The sum of the times recommended for Level I and Level II
For a person being qualified directly to Level II with no time at Level I recommended experience consist of:
Some methods require more initial training at Level I because of differences in complexity and manipulative skills.
In some cases, the training times recommended for Level I are greater than for Level II why?
The same regardless of the candidate's education
The recommended number of training hours in a particular method are:
Examinations to verify that the training material has been comprehended
It is recommended that a training program for qualification and certification purposes should include:
Are included in CP-105 for the methods listed
Recommended training course outlines:
Different based on educational background——————————
For candidates with different educational backgrounds, recommended instruction periods are:—————————-
Is available from a variety of sources.
Recommended training reference material:
Technical principles of the method.
The recommended training course outline includes
All questions to be used on examinations for Level I and Level II.
In accordance with SNT-TC-1A, the NDT Level III shall be responsible for:
A qualified representative of the NDT Level III.
Which of the following may conduct a grade examinations for Level I and Level II personnel?
Annually
How often should the near- vision acuity examination be administered ?
Related to each employer's specific needs
As recommended in SNT-TC-1A, physical examination requirements are intended to be: [Show Less]